Automated endoscope reprocessor features one reprocessing basin with user-programmable reprocessing cycles, and an enhanced sensor package for continuous monitoring of all cycle parameters. The SSD-102LT includes automated endoscope leak testing, a user-selectable wash cycle for endoscope cleaning, automatic alcohol purge and air drying of endoscope channels, and an optional data management system for electronic cycle tracking and record keeping. System design self-disinfects internal fluid lines during every cycle, and a log printout documents all test results. A three-stage water pre-filtration system reduces particulate matter and provides certified bacteria-free water for endoscope rinsing. The SSD-102LT includes heated disinfectant reservoir, air compressor, printer, water pre-filtration system, and one set of air, water and disinfectant filters.
Check out the interactive Hookup Guide: Click here.
Features
- Fast cycle time for quick endoscope turnaround
- Cycle parameters continuously monitored
- Leak test ensures endoscope protection throughout cycle
- Automated alcohol flush and air dry
- Audible and visual alarms for reprocessing cycle deficiency
- Assures patient and operator safety
- Cycle customization meets specific reprocessing needs
- Bacteria retentive three-stage water filtration system
- Compatible with all current models of endoscopes, including those with elevator wire channels
- Printed documentation of all reprocessing cycle data
- Self-disinfects internal fluid lines during every cycle
- For use with most FDA-cleared reusable high-level disinfectants
- Computerized endoscope reprocessing records, vapor management system and neutralization system optional
Documents
Hookup Guide
The interactive Medivators Hookup Guide can be viewed here or click here to view DSD/SSD Hookup Directions for Use.
| Brochures and Other Documents | Document # |
| SSD Product Brochure | 50097-686 Rev A |
| Certificate of Validation for Scopes used with Medivators products | 50096-340 Rev L |
| Hollow Fiber Filter Information | 50096-285 Rev B |
| Function Key Change on Control Panel | 50096-387 Rev A |
| Reprocessor Chemical Compatibility | 50097-529 Rev D |
| Latex Free Statement | 50098-030 Rev A |
| Position Statement on Reprocessing Third Party Repaired Endoscopes | 50098-015 Rev A |
| Installation and User Guides | Document # |
| Endoscope Distal Tip Retainer | MI02-0184 Rev B |
| Chemical Transfer Pump Tubeset & Adapter Instructions | MI02-0102 Rev D |
| Disinfectant: Procedure to switch to an alternate disinfectant (DSD and SSD systems) | MI02-0118 Rev D |
| Filter 0.2 micron: Replacement and Disinfection | MI02-0116 Rev A |
| Filter 0.2 micron: Disinfection with Rapicide | MI02-0125 Rev A |
| Transfer of cycle log data to a PC | 50096-058 Rev B |
| Protocol to validate antimicrobial effectiveness using a Sampling Connector | 50096-108 Rev C |
| Protocol to validate antimicrobial effectiveness using an Endoscope | 50096-109 Rev B |
| Instruction Manual for DSD/SSD GUS Vapor Management System (Model G14SD) | 50096-273 Rev 03 |
| Olympus DSD Rinse Matrix | 50092-044 Rev H |
| Rinse Matrix for Pentax Endoscopes (100 mL) | 50092-126 Rev A |
| Internal Water Filter - Replacement Instructions | 50096-323 Rev B |
| Loading and Discarding Disinfectant (Instructions for using internal transfer pump with red connections) | 50096-348 Rev A |
| Instructions: Installing Disinfectant Filter | 50096-363 Rev A |
| Instructions for Installing the Air Filter | 50096-395 Rev B |
| Maximum Temperature Use Conditions for Rapicide | 50096-250 Rev C |
| DSD and SSD Pre-installation Checklist | 50092-087 Rev F |
| DSD and SSD Installation Checklist | 50092-088 Rev G |
| Water Pre-filtration System Installation Instructions (DSD, DSD Edge, SSD-102) | 50097-363 Rev E |
| SSD-102 Customer Site Requirements | 50097-804 Rev C |
| Installation Instructions for DSD-201LT and SSD-102LT | 50097-832 Rev B |
| Product Bulletins | Document # |
| Product Bulletin RE: Olympus MAJ-855 | 50097-022 Rev E |
| Product Bulletin: Detergent use in Medivators AER's | 50096-004 Rev B |
| Product Bulletin: Colored Connector Simplifies DSD Air Filter Replacement | 50096-406 Rev A |
| Product Bulletin: Compatibility Statement regarding Tristel and Perascope | 50096-730 Rev A |
| Product Bulletin: Ambient Temperature Use of Rapicide and Sterilant | 50096-884 Rev B |
| Product Bulletin: New DSD-201 Hook-up for Olympus 160/180 Series Endoscope | 50096-411 Rev A |
| Product Bulletin: Why Should I Disinfect my AER Waterline? | 50096-344 Rev A |
| Product Bulletin: Colored Tubing Connectors simplify Chemical Transfer Pump use in DSD-201 systems | 50096-349 Rev A |
| Product Bulletin: Color Connectors Simplify Disinfectant Filter | 50096-362 Rev A |
| Product Bulletin: Preventative Maintenance Programs for Medivators DSD, SSD, and Advantage Series Reprocessors | 50096-024 Rev C |
| Product Bulletin: DSD/SSD Leak Test System Synopsis and Operation | MT07-0027 Rev B |
| Product Bulletin: Reprocessing of Endoscope Vales vs. the use of Disposable Valves | 50097-996 Rev A |
| Report Form | Document # |
| Installation Record and Performance Verification | MF03-0090 Rev D |