Renatron® Repair and Maintenance Parts

 17512-000 Silicone Sealant.  Used when replacing Hansen connectors.

17542-000 Dow Corning III Lubricant.  Used to lubricate the Hansen connectors.

35523-002 Hold-to-Set Potentiometer.  Used in conjunction with the hold-to-set button to manually set the volume for the Renatron System.

39500-036 Zebra® Printer Ribbon for label printer.  Zebra Printer Ribbon for the Zebra Label Printer

39500-042 USB Flash Drive For Renalog RM Backup

Preclean and Serial Number Barcode Labels.  The barcodes are ordered as a pair.  The machine serial number must be provided when ordering.

40509-000 Shaft Lock.  Secures the hold-to-set potentiometer to the front wall of the Renatron System.

41005-001 Ball Check Valve.  Replacement check valve for the Renalin uptake tube assembly.  3/8" x 1/4" NPT.

41010-000 Flow Washer – 1 Liter.  Located in the manifold behind valve 2.

41010-001 Flow Washer – 6 Liter.  Located in the manifold behind valve 1.

41013-001 V15 Diaphragm.  Replacement diaphragm for the V-15 Renalin valve assembly

41013-003 V15 Solenoid Assembly. 

41014-001 Small Valve Assembly.  The assembly includes a coil, valve guide and plunger.  The small valve assembly can be used on V2, V10, V12, and V13

41014-002 Small Coil.  Replacement solenoid for V2, V10, V12, and V13

41014-003 Small Valve Guide.  Replacement valve guide for V2, V10, V12, and V13.

41014-004 Small Plunger and Spring.  Replacement plunger and spring for V2, V10, V12, and V13.

41014-015 Small O-Ring.  Replacement O-Ring for V2, V10, V12, and V13.

41015-001 Large Valve Assembly.  The assembly includes a coil, valve guide and plunger.  The Large Valve Assembly can be used on V1, V3, V4, V5, V6, V7, V8, V9 and V11.

41015-002 Large Coil.   Replacement solenoid for V1, V3, V4, V5, V6, V7, V8, V9, and V11.

41015-003 Large Valve Guide.  Replacement valve guide for V1, V3, V4, V5, V6, V7, V8, V9, and V11.

41015-004 Large Plunger and Spring.  Replacement plunger and spring for V1, V3, V4, V5, V6, V7, V8, V9, and V11.

 41015-015 Large O-Ring.  Replacement O-Ring for V1, V3, V4, V5, V6, V7, V8, V9, and V11.

41036-002 3/8” Check Valve.  In-line check valve located on the water inlet hose assembly.

41512-000 Hold to Set Knob.  Silver hold to set knob.

41600-113 Renalin 100 Check Valve.  Replacement check valve for the Renalin 100 uptake tube assembly.

41600-164 Small Valve Washer.  Replacement washer for the small valve coil assembly.

41600-165 Large Valve Washer.  Replacement washer for the large valve coil assembly.

43034-000 Jet Pump O-Ring.  This O-ring is located on the nozzle/spacer assembly, and the drain fitting.

43034-001 Diffuser O-Rings.  Replacement O-rings for the jet pump diffuser assembly (2 needed per diffuser).

43044-000 Hansen O-ring

43044-003 O-Ring – Colder Connector.  Replacement O-ring for all male colder connectors, male swivel connectors, and reprocessing connectors.

44508-000 Flow Washer Spring.  Replace the flow washer springs when you replace the flow washers.  This spring is for the 1 liter or 6 liter flow washers.

45005-026 Load Cell – New Version.  Contact Minntech Technical Services at 800-328-3324  before ordering.

45006-001 Pressure Transducer.  Pressure sensor located on the manifold assembly.

45008-015 CCD Scanner.  CCD Scanner gun for reading the Renalog RM system barcodes.  This is the scanner gun only (cable sold separately below).

45008-020 Cable, 8ft.

47048-001 Jet Pump Removal Tool.  Used to remove the jet pump from the Renatron System.

47049-147 Manifold Plug.  These plugs are located on the back of the manifold.

47502-002 Colder Connector - In-line Female.  Located at the end of the Renalin hose.

47502-003 Colder Connector – Male Threaded.  Located at the top of the uptake tube assembly.

47502-004 Colder Connector – Female Threaded.  Located on the front of the manifold.

47502-005 Colder Connector – Male Barbed.  Located on the end of the arterial bloodline and dialysate line; connects to the female threated connector on the front of the manifold.

47502-006 Colder Connector – Elbow Barbed.  Connects to the female threaded connector on the front of the manifold.

47502-022 Swivel Body.  Quick connnect fitting located on the end of the blood lines.

47509-248 Renatron Drain Hose.  Drain line for the Renatron (6 feet).

47509-249 Red Renalin Hose.  Red Renalin tubing (6 feet) for the Renatron.

47509-357 Adapter 3/8” NPT x ¼” Barb.  Barb fitting located on the uptake tube assembly

47606-001 Suction Tube.  Replaces tube for the Renalin uptake tube assembly. 

47606-005 Renalin 100 Suction Tube.  Replaces tube for the Renalin 100 uptake tube assembly.

47702-000 Hansen – Female Socket.  This Hansen connector threads into the end of the dialyzer holder.

47802-002 Plastic Elbow ¼” NPT x 3/8” Barb.  The elbow is located on the front of the manifold.

47875-000 Hansen – Dialysate Connector.  This Hansen connector is located on the end of the dialysate line.

75060-000 Male/Male Interlock Adapter.  This component is used to join the Hansen connnectors during the sanitize cycle.

75062-000 Dialyzer Holder.  The Dialyzer Holder is located on the front wall of the Renatron System.

75072-002 Modified Cap.  Vented cap for teh uptake tube assembly.

75100-000 Jet Pump Retainer (Drain Fitting).  Connection point for the drain hose.

75227-354 Modified Cap Renalin 100.  Vented Cap located on the Renalin 100 uptake tube assembly.

78147-003 Renalin Uptake Tube Assembly.  Attaches to the Renalin jug.  Not for use with Renalin 100.

78159-002 Calibrated Volume Cell (Cal Cell).  The cal-cell is used to verify the valibration of the Renatron.  Each cal-cell has a preset volume of 70 mls.

78207-000 Large Valve Removal Tool.  Used to remove large valve guides from the Renatron system.

78207-020 Valve Service Kit.  4 Small plungers and springs, 4 small valves guides, 9 large plunger and springs, 9 large valve guides, 1-V15 diaphragm, 9 large valve o-rings, 4 small valve o-rings

78207-040 PM Kit (for Renalin 100 Stations).  1 tubing kit, 1 small valve guide, 1 large valve guide, 10 large tie wraps, 20 small tie wraps, 1-V15 diaphragm, 9 large valve o-rings, 4 small valve o-rings, 16 hansen o-rings, 2 manifold plugs, 10 reprocessing connectors, 1 Renalin 100 check valve, 9 large plungers and spring, 4 small plungers and spring, 1 jet pump nozzle and spacer

78327-020 Pressure Regulator Assembly – Single.  Used to reduce water pressure to your RENATRON system.  Pressure gauge included.  Feeds one RENATRON system.

78327-021 Pressure Regulator Assembly – Double.  Used to reduce water pressure to your RENATRON system.  Pressure gauge included.  Feeds two RENATRON systems.

78327-030 Inlet Pressure Gauge Assembly – Single.  Take your daily water pressure readings with the Inlet Pressure Gauge Assembly.  Feeds one RENATRON system (does not regulate water pressure).

78327-031 Inlet Pressure Gauge Assembly- Double.  Take your daily water pressure readings with the Inlet Pressure Gauge Assembly.  Feeds two RENATRON systems (does not regulate water pressure).

78342-001 Double Drip Tray Constructed of RENALIN Cold Sterilant resistant material.  The dual drip tray will accommodate two RENATRON Systems.  33.25" x 28" x 3.5"

78342-002 Single Drip Tray.  Constructed of Renalin Cold Sterilant resistant material.  The single drip tray will accommodate one Renatron System.  15" x 28" x 3.5"

78397-842 Jet Pump Nozzle/Spacer Assembly.  The jep pump nozzle/spacer is located in the manifold behind the jet pump diffuser.

78397-843 Jet Pump Diffuser Assembly.  Located in the manifold behind the jet pump drain fitting.

78397-847 Renalin 100 Uptake Tube Assembly.  Attaches to the RENALIN 100 jug.

78397-848 Renatron II 100 Series Conversion Kit.  Kit used to convert standard Renatron II machines to Renatron II 100 Series machines.

78397-881 Tubing Kit.  3 Bushings and spacers, 1 - 24 inch piece of PVC tubing (dialysate line), 1 arterial blood tubing and connector, 1 venous blood tubing and connector, 10 large tie wraps, 2 swivel body.

78398-133 Label Printer.  Resolution:  203 dpi (8 dots/mm).  Width: 4.09" (104mm).  Speed: 4" (102mm) per second.  Construction:  High-impact, double walled plastic enclosure.

78398-134 Badge Holder.  Designed to hold the technician bar code information that is a part of the RENALOG RM program.

78398-135 Flat Screen Monitor.  Analog, TFT active matrix panel with a screen resolution of 1,024 x 768 at 60 to 75 Hz.  16 million colors on an anti-glare, anti-reflective, adjustive display.

78398-141 Inkjet Report Printer.  Minimum of 2880 x 720 dpi resolution.  Individual ink cartridges.  USB connectivity with network options.  Model based on availability.

78398-687 Female Tube Fitting.  This fitting is located on the RENALIN 100 uptake tube assembly.

78398-719 New Style Control Board for Renatron II 100 Series.  Control board with S1, S2 and S3.  RENATRON serial number required when ordering.

78398-723 Plugged Hansen Assembly.  Used to block one of the dialysate ports on your dialyzer while performing a Reverse UF.

78400-074 Venous outlet Clamp Kit.  This kit allows the user to add a venous tubing clamp to the front of the RENATRON in place of the sanitize ports.